Silverstone SG03 Owners (TJ08 vs SG03)

[shinjukumaster]

Just purchased a TJ08, and kinda wish I'd got a SG03.

A few questions:

How much clearance is there between the rear of the top 5.25@ drive bay, and the front of PSU?

Is there any way, other than hard mount, possible for the 3.5@ drive bays in the bottom of the case?

Are the front port cables ridiculously long (as in TJ08)?

[Maturin]

- The clearance of the top 5.25 bay goes all the way to the back of the case. The PSU is set with its corner below the corner of the DVD drive.

-The hard drives on the bottom of the case are not hard mounted, they use plastic brackets to slide into the bottom plates. There is a vertical 3.5 bay that can also be used for a hard drive (as well as card reader or fan controller)

- I found the front port cables to be long, but not quite absurdly long. I tucked the slack under the mobo anyway to try to keep clean cabling.

All in all I really like the design of the case, I just wish it was a bit smaller. Coming from a G5 Shuttle I was kinda spoiled in that regard...

[shinjukumaster]

I'm going to stick with a TJ08 for cooling... I can get a Scythe Ninja in there.