Welcome, Guest. Please login or register.
May 25, 2013, 04:25:00 PM
Sudhian > SFF Tech > Other Small Form Factor Barebones > Anyone know about the NT06-E?
Pages: 1 [2]   Go Down
« previous next »
  Print  
Author Topic: Anyone know about the NT06-E?  (Read 10752 times)
P.W
Regular

Posts: 103

Join Date: Feb, 2006
« Reply #25 on: October 26, 2008, 01:34:32 AM »
My NT06-lite is pretty good. It keeps my cpu under 65 at load.
Logged
Bane
Regular

Posts: 142

Join Date: Nov, 2006
« Reply #26 on: October 26, 2008, 01:54:20 PM »
Quote from: "Swed" date="1224812830"
Obviously something is wrong here!

My NT06-lite should be 78mm high, and the NT06-E should be 82mm and the
Extreme-X should be 118mm minus the fan ~25mm (1"), that is >90mm.
It shouldn't fit.

Also removing the fan attachment shroud decreases height by a few mm's.



Edit: Image url altered.
Logged
Swed
Green

Posts: 4

Join Date: Oct, 2008
« Reply #27 on: October 27, 2008, 12:02:39 AM »
Quote from: "Bane" date="1225043660"
Quote from: "Swed" date="1224812830"
Obviously something is wrong here!

My NT06-lite should be 78mm high, and the NT06-E should be 82mm and the
Extreme-X should be 118mm minus the fan ~25mm (1"), that is >90mm.
It shouldn't fit.

Also removing the fan attachment shroud decreases height by a few mm's.
I still think the messures are wrong someware, probebly at the ExtremeX.
But more than one people have made it to fit, so it will probebly fit fore the rest to Wink, and that's good!

Swed
Logged
Maturin
Ace

Posts: 1,462

Join Date: Apr, 2006
« Reply #28 on: October 27, 2008, 12:13:04 PM »
iG I love the look of your Silver SG-03 with the white LEDs. Beautiful work on the blowhole mod too, makes me want to keep my SG-03 running a bit longer...
Logged
Bane
Regular

Posts: 142

Join Date: Nov, 2006
« Reply #29 on: October 28, 2008, 01:14:59 AM »
There is a slight problem with a DFI LANParty JR P45-T2RS motherboard and Enzotech cooler.

Due to the position of the CPU socket, the heatsink extends heigh enough to cover the end of optical drive bay.  So you won't be able to fit the optical drive (so all 4 fixing holes align) and have it fully pushed in so flush with front of case.  But, there is enough vertical space to have the optical drive sloping upwards, with the power and IDE/S-ATA connections end resting on top of the heatsink.  And then being able to semi screw in a securing nut at the front.

Edit: Cleaned the front fan mesh today.  So here's a picture showing how the Enzotech Extreme-X, on a DFI LANParty JR P45-T2RS motherboard, is positioned higher and so blocks the end of optical drive bay.  Thus preventing proper fixing of the optical drive by four screws.




Edit 2: Some more pictures with PSU removed.
Logged
Bane
Regular

Posts: 142

Join Date: Nov, 2006
« Reply #30 on: May 08, 2010, 08:15:04 AM »
Quote from: "iG" date="1224746393"
Here's the EnzoTech Extreme in my SG03 v2.1:

Did you transfer the cooler to the SG-05W?  As I'm considering the same case, or SG-06S
Logged
beriklangratis
Green

Posts: 1

Join Date: Nov, 2010
« Reply #31 on: November 27, 2010, 10:55:52 PM »
Logged
Pages: 1 [2]   Go Up
  Print  
« previous next »
 
Jump to: