Anyone know about the NT06-E?

[P.W]

My NT06-lite is pretty good. It keeps my cpu under 65 at load.

[Bane]

Obviously something is wrong here!

My NT06-lite should be 78mm high, and the NT06-E should be 82mm and the
Extreme-X should be 118mm minus the fan ~25mm (1"), that is >90mm.
It shouldn't fit.

Also removing the fan attachment shroud decreases height by a few mm's.



Edit: Image url altered.

[Swed]

Obviously something is wrong here!

My NT06-lite should be 78mm high, and the NT06-E should be 82mm and the
Extreme-X should be 118mm minus the fan ~25mm (1"), that is >90mm.
It shouldn't fit.

Also removing the fan attachment shroud decreases height by a few mm's.

I still think the messures are wrong someware, probebly at the ExtremeX.
But more than one people have made it to fit, so it will probebly fit fore the rest to , and that's good!

Swed

[Maturin]

iG I love the look of your Silver SG-03 with the white LEDs. Beautiful work on the blowhole mod too, makes me want to keep my SG-03 running a bit longer...

[Bane]

There is a slight problem with a DFI LANParty JR P45-T2RS motherboard and Enzotech cooler.

Due to the position of the CPU socket, the heatsink extends heigh enough to cover the end of optical drive bay.  So you won't be able to fit the optical drive (so all 4 fixing holes align) and have it fully pushed in so flush with front of case.  But, there is enough vertical space to have the optical drive sloping upwards, with the power and IDE/S-ATA connections end resting on top of the heatsink.  And then being able to semi screw in a securing nut at the front.

Edit: Cleaned the front fan mesh today.  So here's a picture showing how the Enzotech Extreme-X, on a DFI LANParty JR P45-T2RS motherboard, is positioned higher and so blocks the end of optical drive bay.  Thus preventing proper fixing of the optical drive by four screws.




Edit 2: Some more pictures with PSU removed.

[Bane]

Here's the EnzoTech Extreme in my SG03 v2.1:

Did you transfer the cooler to the SG-05W?  As I'm considering the same case, or SG-06S

[beriklangratis]