I purchased a Chaintech socket A model 7AJA2E and an Athlon XP 1.4 GHz.
The specs on the MBO claims it can support up to 1.4 GHz with a front side bus of 200.
The processer is incorrectly identified as a 1.05 and I have a FSB of 100.
The manual claims there is a jumper setting, JP9, that is set to 1-2 by default for 100 FSB. 2-3 is for 133 FSB. Problem is, 1-2 is soldered by default.
I did try to unsolder it and resolder to 2-3, it did identify the CPU on start up as correct but then it froze and would do no more.
So I set it back to the way it was.
There is no option in the bios, as far as I can tell, to change the FSB.
The board can be identified here http://www.evertek.com/include/offsite.asp?Action=Frames&Url=http%3A%2F%2Fwww%2Echaintechusa%2Ecom%2Fproducts%2Fsocketa%2F7aja2e%2Ehtm&ReturnLoc=http%3A%2F%2Fwww%2Eevertek%2Ecom
If anyone has any ideas or suggestions it would be greatly appreciated.