Welcome, Guest. Please login or register.
May 25, 2013, 11:49:22 AM
Sudhian > General > Operating Systems > General Software > How to enable the HLT Command on a KT400 Board?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: How to enable the HLT Command on a KT400 Board?  (Read 112 times)
Dr4go
Green

Posts: 14

Join Date: Nov, 2002
« on: November 24, 2002, 06:38:44 PM »
Does anybody know how I can activate the HLT (=Idle) command on a VIA KT400 Mainboard (=Asus A7V8X) with an Athlon XP CPU?

Thx in advance
Drago  
Logged
Dr4go
Green

Posts: 14

Join Date: Nov, 2002
« Reply #1 on: November 24, 2002, 06:38:44 PM »
How to enable the HLT Command on a KT400 Board?
Logged
GeorgeBreese
Ace

Posts: 2,088

Join Date: Dec, 2001
« Reply #2 on: November 25, 2002, 12:38:49 AM »
Follow the old instructions, but substitute register D2 for 92, and D5 for 95.

So, enabling ACPI cooling would involve setting register D2 to a value of Hex:EB (or setting bit #7 to a value of 1). Setting HLT cooling would mean setting register D5 to 1E, or setting bit #1 to a value of 1.
Logged
Dr4go
Green

Posts: 14

Join Date: Nov, 2002
« Reply #3 on: November 25, 2002, 09:54:04 AM »
Thanks for your fast help and for your suggestions / explanations George. :-)

Drago
Logged
GeorgeBreese
Ace

Posts: 2,088

Join Date: Dec, 2001
« Reply #4 on: November 26, 2002, 09:31:54 AM »
You're welcome.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: