Welcome, Guest. Please login or register.
May 22, 2013, 03:42:53 AM
Sudhian > Sudhian > Sudhian Folding > dual processors, dual clients?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: dual processors, dual clients?  (Read 277 times)
astrobee
Veteran

Posts: 338

Join Date: Sep, 2002
« on: January 02, 2003, 05:42:15 AM »
Finally found time to throw 2 PII 333MMX cpu's into my old PII box.
I'M trying to run 2 clients but having no luck.
How do you set this up? I thought I could just I just download two clients into seperate folders
and start them up but the rig is only allowing 1 of them to run.
Right now, it is is only utilizing 50% of the processors.
Help!

Tyan S1692D TIGER II running NT
Logged
astrobee
Veteran

Posts: 338

Join Date: Sep, 2002
« Reply #1 on: January 02, 2003, 05:42:15 AM »
dual processors, dual clients?
Logged
skyman
Regular

Posts: 205

Join Date: Sep, 2002
« Reply #2 on: January 02, 2003, 10:13:25 AM »
Make sure you run the FAH.exe -config in each directory.  Dont just copy directories.  
Logged
ScutMonkey
Ace

Posts: 7,449

Join Date: Dec, 2001
« Reply #3 on: January 02, 2003, 01:27:35 PM »
If you're running the command line version, when it starts up go into advanced options and set the machine ids to be different.
Logged
chewyboy
Ace

Posts: 1,647

Join Date: Jun, 2002
« Reply #4 on: January 02, 2003, 02:27:11 PM »
yeah definately make sure the machine id's are different with the console, even though they say they got it fixed and you dont have to, do it anyway  i did about 5 of the same unit's before i changed mine out  now it's working much better
Logged
astrobee
Veteran

Posts: 338

Join Date: Sep, 2002
« Reply #5 on: January 02, 2003, 04:45:57 PM »
OK, switched over to the console version and was successful!
81 hours to crank out two 7.3 point WUs. If you ask me, that is not to bad for that old box.
Logged
romad100
Ace

Posts: 1,332

Join Date: Sep, 2002
« Reply #6 on: July 01, 2003, 04:00:27 PM »
if your using XP or 2k, just

go to task manager and right click on the .exe and then set affinity to CPU 0 for one of the clients and the CPU 1 for the other
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: