Welcome, Guest. Please login or register.
June 19, 2013, 10:01:19 AM
Sudhian > SFF Tech > Other Small Form Factor Barebones > Biostar iDEQ SFF > SATA problem with IDEQ 200N
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: SATA problem with IDEQ 200N  (Read 946 times)
bsawhney
Regular

Posts: 29

Join Date: Jul, 2003
« on: August 04, 2003, 12:17:28 AM »
Windows XP Pro SP1 stopped booting after 3 days of running pretty well on SATA 120GB 7200.7 8MB buffer drive. Safe Mode boot would stop at loading mup.sys. Tried a lot of different options to recover the disk using the recover option in XP to no avail. Looks like the partition was really trashed. Tried a fresh clean install, but XP was unable to delete the existing partition.

After spending around 5-6 hrs trying out all the options, I gave up, and bought a regular IDE 120GB Maxtor DiamondMax Plus 8MB buffer drive.

Reinstalled WinXP Pro SP1 on the maxtor IDE drive with no problems.

I am not sure what the problem was with the SATA config, but just wanted to provide an update for the people who may be considering a SATA drive.
Logged
bsawhney
Regular

Posts: 29

Join Date: Jul, 2003
« Reply #1 on: August 04, 2003, 12:17:28 AM »
SATA problem with IDEQ 200N
Logged
maglev
Green

Posts: 2

Join Date: Aug, 2003
« Reply #2 on: August 17, 2003, 02:00:51 AM »
It's a VIA chip that's doing the SATA.  'Nuff said.

I got a VIA USB2.0 chip in my motherboard.  'Don't work.

Etc, etc....

I'd be very surprised if anyone here reports their SATA drive working for a long time.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: