Welcome, Guest. Please login or register.
May 20, 2013, 11:06:34 PM
Sudhian > SFF Tech > Other Small Form Factor Barebones > Biostar iDEQ SFF > Whats your fan running at?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Whats your fan running at?  (Read 324 times)
SandboxTiger
Elite

Posts: 783

Join Date: Jun, 2003
« on: September 30, 2003, 01:52:35 PM »
Do you have your fans set at full or what do you have them running at? Also hving them set at full how hard is that on them?

What extra fans do you have, and where did you put them. I wouldn't mind one on IGP for mem not graphics. Anyone have pics of how they did it or thier extra fans?  
Logged
SandboxTiger
Elite

Posts: 783

Join Date: Jun, 2003
« Reply #1 on: September 30, 2003, 01:52:35 PM »
Whats your fan running at?
Logged
HemoPhilic
Regular

Posts: 146

Join Date: Feb, 2003
« Reply #2 on: October 02, 2003, 08:55:21 AM »
I only have 1 extra fan and thats a 40mm screwed onto the northbridge heatsink.
Logged
jtopping
Regular

Posts: 167

Join Date: Sep, 2003
« Reply #3 on: October 02, 2003, 06:34:54 PM »
you dont really need the extra 40mm unless you are overclocking and using IGP, which is pretty hard to do btw
Logged
Hammerstein
Regular

Posts: 108

Join Date: Aug, 2003
« Reply #4 on: October 02, 2003, 09:05:37 PM »
I...well...ran the two units that didn't like me at 10%/10% and put one extra 20 mm or so fan hanging from the drive cage just as an attempt to get air moving.  I didn't case cut (and luckily since both iDeqs hated me!).   The little fan seemed to help a bit, though I 7-volted it since little things like that make too much noise for their own good...
Logged
GlenBA
Green

Posts: 24

Join Date: Sep, 2003
« Reply #5 on: October 02, 2003, 09:19:23 PM »
If I want it quiet, I put on auto, which runs the CPU and Systems fans @ 8% and 3%
respectively, most of the time.

For cooling and medium noise I bump them both up to 20%.

Anyone notice the System Fan maxes out at 20% @ ~4100 RPM while the CPU Fan
maxes at 70% @ ~ 5100-5200 RPM?
Logged
SandboxTiger
Elite

Posts: 783

Join Date: Jun, 2003
« Reply #6 on: October 03, 2003, 10:52:57 AM »
they max out? What should I have them set at OCing I don't want them maxing out on me. How did you attach it to the northbridge you have a picture?
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: