Welcome, Guest. Please login or register.
May 19, 2013, 03:07:09 PM
Sudhian > SFF Tech > Other Small Form Factor Barebones > Biostar iDEQ SFF > IDEQ 200n Cooling troubles
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: IDEQ 200n Cooling troubles  (Read 409 times)
Reggiefl
Green

Posts: 2

Join Date: Oct, 2003
« on: October 03, 2003, 06:26:38 PM »
IDEQ 200n Cooling troubles
Logged
Reggiefl
Green

Posts: 2

Join Date: Oct, 2003
« Reply #1 on: October 03, 2003, 06:26:38 PM »
I just got my IDEQ 200N and set it up. I am running a 2700+ at default Bios settings. I left it running in BIOS to check temps and settings. Idle temp is 53c! The CPU throttling is disabled ( although I have tried some of the other settings). The PC Health status shows JCFAN1 at 3515 rmp, SSYSFAN at 0, and JCFAN@ at 2656. Should there be a SYSFAN listed? Are these temps normal for a room with an ambient temp of about 80F? Is there supposed to be a SYSFAN? Any help would be appreciated, thanks.
Logged
dennya
Regular

Posts: 34

Join Date: Aug, 2003
« Reply #2 on: October 03, 2003, 07:06:16 PM »
Those numbers are all normal... I get about 50 to 53 with my 2500+ after the iDEQ's been on for a while.

I know people round these parts love to brag about numbers in the 30s, etc., but the fact is that numbers in the low 50s are just fine for a Barton Athlon chip.
Logged
SandboxTiger
Elite

Posts: 783

Join Date: Jun, 2003
« Reply #3 on: October 03, 2003, 07:44:31 PM »
Quote
Originally posted by: dennya
Those numbers are all normal... I get about 50 to 53 with my 2500+ after the iDEQ's been on for a while.

I know people round these parts love to brag about numbers in the 30s, etc., but the fact is that numbers in the low 50s are just fine for a Barton Athlon chip.


I plan on adding a 80mm fan or two when I order mine I think that should help  
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: