Welcome, Guest. Please login or register.
May 24, 2013, 07:45:04 AM
Sudhian > Sudhian Hardware > Hardware > Audio and Video > "out of range" error during boot, then fine in XP
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: "out of range" error during boot, then fine in XP  (Read 196 times)
jaxdolfan
Green

Posts: 20

Join Date: Dec, 2003
« on: July 01, 2004, 11:58:27 PM »
I have an SN41G2, with a new Sapphire Radeon 9600XT in it.  It works well in windows with the appropriate drivers, but during boot up and in the BIOS, I cannot see it on my monitor.  I get the "out of range" error.  My monitor is a NEC 1715 LCD.  I have d/l the latest drivers and have updated them.  

Any ideas on how to get the card to send the boot signal in a normal, readable format?
Logged
jaxdolfan
Green

Posts: 20

Join Date: Dec, 2003
« Reply #1 on: July 01, 2004, 11:58:27 PM »
"out of range" error during boot, then fine in XP
Logged
OLIRC
Ace

Posts: 2,900

Join Date: Jan, 2003
« Reply #2 on: July 02, 2004, 08:11:15 PM »
Check you'r monitor and what rez and freq it supports as that can be your problem here ie you're probably have to high/low freq then the monitor support allthough it's odd everything is normal in Windows.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: