Welcome, Guest. Please login or register.
May 25, 2013, 08:13:43 AM
Sudhian > SFF Tech > Modifications and Quiet SFFing > XPC P-Series Water Cooling Worklog
Pages: 1 [2]   Go Down
« previous next »
  Print  
Author Topic: XPC P-Series Water Cooling Worklog  (Read 3152 times)
panch
Regular

Posts: 152

Join Date: Dec, 2004
« Reply #25 on: May 06, 2008, 12:03:42 PM »
Or the SP35P2 for that matter? Smiley
What cooling kit did you install?

I think this would be a nice mod, but I'd like to see pictures of how the radiator heat is sent out of the case, and how the 120mm fan is installed.
Logged
Xanonymous
Regular

Posts: 119

Join Date: Mar, 2008
« Reply #26 on: May 06, 2008, 12:25:13 PM »
OMG, panch!  Now we will start a bidding war! Smiley
Logged
DuVeL
Regular

Posts: 42

Join Date: Sep, 2006
« Reply #27 on: May 06, 2008, 12:25:26 PM »
Just saw this Dino, nice stuff you did back then!
Got to say I was thinking of watercooling my Shuttle but as I use it for LANs in the UK I'd better not do that (no liquids allowed in the planes).
Bit of a bummer but through customs I had a few times some problems when I had to explain that it needed a powersource to start the machine (not as a laptop).
Logged
panch
Regular

Posts: 152

Join Date: Dec, 2004
« Reply #28 on: May 06, 2008, 12:48:42 PM »
Quote from: "Xanonymous" date="1210091113"
OMG, panch!  Now we will start a bidding war! Smiley
That's tight! Smiley
Well I bet if it fits in your's it'll also fint in mine and vice versa. They are almost identical wrt inner dimensions, aren't they?
Logged
Xanonymous
Regular

Posts: 119

Join Date: Mar, 2008
« Reply #29 on: May 06, 2008, 01:14:35 PM »
Noooooo  8-/ .  It would never fit in yours!  But seriously - yes, the heatsink mountings etc. are identical.  :shut:
 Smiley
Logged
panch
Regular

Posts: 152

Join Date: Dec, 2004
« Reply #30 on: May 06, 2008, 01:18:44 PM »
I'll be looking forward to your Mod, Xanonymous Wink
Logged
Xanonymous
Regular

Posts: 119

Join Date: Mar, 2008
« Reply #31 on: May 06, 2008, 01:20:25 PM »
You first!   :-)
Logged
dino
Veteran

Posts: 323

Join Date: Mar, 2005
« Reply #32 on: May 07, 2008, 04:39:30 AM »
Quote from: "panch" date="1210089822"
Or the SP35P2 for that matter? Smiley
What cooling kit did you install?

I think this would be a nice mod, but I'd like to see pictures of how the radiator heat is sent out of the case, and how the 120mm fan is installed.

I just purchased parts from different places.  The CPU block is visible, from DangerDen, but with a custom ordered lucite top to fit the mounting dimensions of the Shuttle motherboard.  The original ICE mounting screws work perfectly, but with small rubber O-rings instead of the big springs.  Tygon tubing is 1/2" ID, 3/4" OD, and I have a few feet spare feet.  GPU block is a Polar TT, I think, and it was easily mounted to both an ATI 9700 and later a 7800 GT (@640MHz).  The GPU water flow  is perfect because it is pumped from above the block, forcing the water into the deep channels, then sucked out the side.  Also, the order of cooling components is ideal: radiator, pump, cpu, gpu.

The radiator heat it blown out the top of the case from the fan mounted directly on it.  I cut a blowhole in my top directly above the radiator.  Even though the radiator is in the top-rear drive bay, I still had a pair of Raptors running in this system, so the internal drive bay is NOT occupied with water cooling gear.  For the drive up top, I used a thermally conductive material to transfer the drive's heat directly to the external cover.
Logged
dino
Veteran

Posts: 323

Join Date: Mar, 2005
« Reply #33 on: May 07, 2008, 04:44:06 AM »
Here is the custom circuit I designed and assembled to control the voltage to the water pump:


And the pumps RPMs shown using Speedfan:
Logged
AXID22
Regular

Posts: 127

Join Date: Apr, 2008
« Reply #34 on: May 08, 2008, 12:17:15 AM »
THIS POST ROCKS!!!
Logged
Pages: 1 [2]   Go Up
  Print  
« previous next »
 
Jump to: